Michigan Well Data › Antrim County
Antrim County, Michigan: well depth, water level & drilling cost
✓ 9,642 Wellogic records · verified 2026-06-29
How deep are wells in Antrim County, Michigan?
The median drilled well depth in Antrim County is 103 ft, based on 9,599 wells with recorded depths in the state Wellogic database. Half of all wells fall between 67 ft and 151 ft; 90% are shallower than 217 ft. Wells drilled since 2016 have a median depth of 107 ft.
How much does it cost to drill a well in Antrim County?
Applying published per-foot rates to the local median depth of 107 ft: drilling and casing alone typically runs $2,675–$6,955; a complete system including pump, pressure tank, and hookup typically runs $6,420–$10,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Antrim County?
The median static water level is 40 ft below ground surface (middle half of wells: 14 ft–90 ft), from 9,226 measurements.
How much water do wells in Antrim County produce?
The median tested yield is 20 gpm (middle half: 12 gpm–30 gpm), from 9,218 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Antrim County address — $19
Drilled depth distribution
Who drills wells in Antrim County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #05-2263 | 396 |
| Lic. #05-1914 | 204 |
| Lic. #40-2524 | 147 |
| Lic. #28-0270 | 147 |
| Lic. #28-2187 | 145 |
| Lic. #05-2366 | 130 |
| Lic. #40-1908 | 75 |
| Lic. #16-2600 | 46 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Antrim County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Mancelona (49659) — 2,567 wells, median 116 ft
- Bellaire (49615) — 1,494 wells, median 88 ft
- Kewadin (49648) — 1,389 wells, median 100 ft
- Elmira (49730) — 1,142 wells, median 109 ft
- Central Lake (49622) — 691 wells, median 80 ft
- Ellsworth (49729) — 561 wells, median 87 ft
- Alden (49612) — 514 wells, median 114 ft
- Elk Rapids (49629) — 398 wells, median 93 ft
- Alba (49611) — 96 wells, median 114 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.