Michigan Well Data › Crawford County
Crawford County, Michigan: well depth, water level & drilling cost
✓ 6,161 Wellogic records · verified 2026-06-29
How deep are wells in Crawford County, Michigan?
The median drilled well depth in Crawford County is 75 ft, based on 6,147 wells with recorded depths in the state Wellogic database. Half of all wells fall between 48 ft and 121 ft; 90% are shallower than 167 ft. Wells drilled since 2016 have a median depth of 100 ft.
How much does it cost to drill a well in Crawford County?
Applying published per-foot rates to the local median depth of 100 ft: drilling and casing alone typically runs $2,500–$6,500; a complete system including pump, pressure tank, and hookup typically runs $6,000–$10,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Crawford County?
The median static water level is 25 ft below ground surface (middle half of wells: 10 ft–58 ft), from 6,014 measurements.
How much water do wells in Crawford County produce?
The median tested yield is 30 gpm (middle half: 15 gpm–40 gpm), from 5,660 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Crawford County address — $19
Drilled depth distribution
Who drills wells in Crawford County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #20-2200 | 599 |
| Lic. #72-2106 | 62 |
| Lic. #26-2248 | 40 |
| Lic. #72-2270 | 39 |
| Lic. #65-1906 | 38 |
| Lic. #72-2105 | 37 |
| Lic. #69-2460 | 19 |
| Lic. #69-2599 | 19 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Crawford County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Grayling (49738) — 3,190 wells, median 60 ft
- Frederic (49733) — 649 wells, median 80 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.