Michigan Well Data › Lenawee County
Lenawee County, Michigan: well depth, water level & drilling cost
✓ 19,377 Wellogic records · verified 2026-06-29
How deep are wells in Lenawee County, Michigan?
The median drilled well depth in Lenawee County is 85 ft, based on 19,328 wells with recorded depths in the state Wellogic database. Half of all wells fall between 61 ft and 116 ft; 90% are shallower than 154 ft. Wells drilled since 2016 have a median depth of 97 ft.
How much does it cost to drill a well in Lenawee County?
Applying published per-foot rates to the local median depth of 97 ft: drilling and casing alone typically runs $2,425–$6,305; a complete system including pump, pressure tank, and hookup typically runs $5,820–$9,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Lenawee County?
The median static water level is 25 ft below ground surface (middle half of wells: 14 ft–36 ft), from 18,373 measurements.
How much water do wells in Lenawee County produce?
The median tested yield is 15 gpm (middle half: 12 gpm–24 gpm), from 9,501 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Lenawee County address — $19
Drilled depth distribution
Who drills wells in Lenawee County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #46-0551 | 1,301 |
| Lic. #81-2014 | 436 |
| Lic. #30-1934 | 70 |
| Lic. #38-2487 | 61 |
| Lic. #58-2011 | 48 |
| Lic. #78-1607 | 28 |
| Lic. #13-2480 | 20 |
| Lic. #30-2241 | 19 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Lenawee County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Adrian (49221) — 5,033 wells, median 77 ft
- Tecumseh (49286) — 2,269 wells, median 76 ft
- Onsted (49265) — 1,867 wells, median 90 ft
- Manitou Beach (49253) — 901 wells, median 89 ft
- Tipton (49287) — 776 wells, median 87 ft
- Britton (49229) — 758 wells, median 100 ft
- Clinton (49236) — 676 wells, median 89 ft
- Clayton (49235) — 605 wells, median 78 ft
- Addison (49220) — 550 wells, median 93 ft
- Morenci (49256) — 412 wells, median 92 ft
- Blissfield (49228) — 243 wells, median 107 ft
- Sand Creek (49279) — 194 wells, median 62 ft
- Deerfield (49238) — 156 wells, median 98 ft
- Palmyra (49268) — 95 wells, median 119 ft
- Jasper (49248) — 90 wells, median 133 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.