Michigan Well Data › Menominee County
Menominee County, Michigan: well depth, water level & drilling cost
✓ 5,442 Wellogic records · verified 2026-06-29
How deep are wells in Menominee County, Michigan?
The median drilled well depth in Menominee County is 68 ft, based on 5,430 wells with recorded depths in the state Wellogic database. Half of all wells fall between 45 ft and 122 ft; 90% are shallower than 189 ft. Wells drilled since 2016 have a median depth of 105 ft.
How much does it cost to drill a well in Menominee County?
Applying published per-foot rates to the local median depth of 105 ft: drilling and casing alone typically runs $2,625–$6,825; a complete system including pump, pressure tank, and hookup typically runs $6,300–$10,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Menominee County?
The median static water level is 13 ft below ground surface (middle half of wells: 7 ft–23 ft), from 5,309 measurements.
How much water do wells in Menominee County produce?
The median tested yield is 12 gpm (middle half: 10 gpm–20 gpm), from 5,325 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Menominee County address — $19
Drilled depth distribution
Who drills wells in Menominee County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #55-2210 | 367 |
| Lic. #22-2431 | 50 |
| Lic. #93-2283 | 31 |
| Lic. #22-1716 | 14 |
| Lic. #22-0575 | 4 |
| Lic. #21-1730 | 3 |
| Lic. #93-2093 | 2 |
| Lic. #21-1725 | 2 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Menominee County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Menominee (49858) — 1,343 wells, median 44 ft
- Stephenson (49887) — 743 wells, median 79 ft
- Wallace (49893) — 588 wells, median 65 ft
- Daggett (49821) — 574 wells, median 82 ft
- Wilson (49896) — 421 wells, median 101 ft
- Carney (49812) — 344 wells, median 76 ft
- Powers (49874) — 264 wells, median 82 ft
- Hermansville (49847) — 233 wells, median 71 ft
- Spalding (49886) — 106 wells, median 87 ft
- Perronville (49873) — 100 wells, median 77 ft
- Ingalls (49848) — 62 wells, median 77 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.