Michigan Well Data › Midland County
Midland County, Michigan: well depth, water level & drilling cost
✓ 11,375 Wellogic records · verified 2026-06-29
How deep are wells in Midland County, Michigan?
The median drilled well depth in Midland County is 100 ft, based on 11,364 wells with recorded depths in the state Wellogic database. Half of all wells fall between 60 ft and 165 ft; 90% are shallower than 335 ft. Wells drilled since 2016 have a median depth of 97 ft.
How much does it cost to drill a well in Midland County?
Applying published per-foot rates to the local median depth of 97 ft: drilling and casing alone typically runs $2,425–$6,305; a complete system including pump, pressure tank, and hookup typically runs $5,820–$9,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Midland County?
The median static water level is 12 ft below ground surface (middle half of wells: 6 ft–24 ft), from 10,370 measurements.
How much water do wells in Midland County produce?
The median tested yield is 15 gpm (middle half: 10 gpm–30 gpm), from 10,524 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Midland County address — $19
Drilled depth distribution
Who drills wells in Midland County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #37-2084 | 269 |
| Lic. #37-2236 | 226 |
| Lic. #56-1503 | 115 |
| Lic. #26-2248 | 53 |
| Lic. #09-1754 | 53 |
| Lic. #73-1623 | 53 |
| Lic. #59-2550 | 49 |
| Lic. #26-2621 | 40 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Midland County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Midland (48640) — 3,651 wells, median 90 ft
- Coleman (48618) — 1,628 wells, median 90 ft
- Midland (48642) — 1,350 wells, median 188 ft
- Breckenridge (48615) — 601 wells, median 95 ft
- Hope (48628) — 576 wells, median 130 ft
- Sanford (48657) — 494 wells, median 69 ft
- Edenville (48620) — 63 wells, median 130 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.