Michigan Well Data › Montmorency County
Montmorency County, Michigan: well depth, water level & drilling cost
✓ 5,436 Wellogic records · verified 2026-06-29
How deep are wells in Montmorency County, Michigan?
The median drilled well depth in Montmorency County is 71 ft, based on 5,414 wells with recorded depths in the state Wellogic database. Half of all wells fall between 50 ft and 111 ft; 90% are shallower than 167 ft. Wells drilled since 2016 have a median depth of 72 ft.
How much does it cost to drill a well in Montmorency County?
Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Montmorency County?
The median static water level is 26 ft below ground surface (middle half of wells: 14 ft–52 ft), from 5,152 measurements.
How much water do wells in Montmorency County produce?
The median tested yield is 15 gpm (middle half: 10 gpm–20 gpm), from 5,111 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Montmorency County address — $19
Drilled depth distribution
Who drills wells in Montmorency County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #60-1809 | 180 |
| Lic. #60-2357 | 159 |
| Lic. #35-2137 | 66 |
| Lic. #65-2493 | 56 |
| Lic. #04-2580 | 42 |
| Lic. #04-1920 | 40 |
| Lic. #71-2045 | 37 |
| Lic. #69-2460 | 34 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Montmorency County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Lewiston (49756) — 2,829 wells, median 62 ft
- Atlanta (49709) — 2,036 wells, median 75 ft
- Hillman (49746) — 1,600 wells, median 84 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.